Table 7: BT200 Call Features
Key
Call Features
*30
Block Caller ID (for all subsequent calls)
*31
Send Caller ID (for all subsequent calls)
*67
Block Caller ID (per call)
*82
Send Caller ID (per call)
*70
Disable Call Waiting (per Call)
*71
Enable Call Waiting (per Call)
*72
Unconditional Call Forward
To use this feature, dial “*72” and get the dial tone. Dial the forward number and “#”
for a dial tone, then hang up.
*73
Cancel Unconditional Call Forward
To cancel “Unconditional Call Forward”, dial “*73” and get the dial tone, then hang
up.
*90
Busy Call Forward
To use this feature, dial “*90” and get the dial tone. Dial the forward number and “#”
for a dial tone, then hang up.
*91
Cancel Busy Call Forward
To cancel “Busy Call Forward”, dial “*91” and get the dial tone, then hang up.
*92
Delayed Call Forward
To use this feature, dial “*92” and get the dial tone. Dial the forward number and “#”
for a dial tone, then hang up.
*93
Cancel Delayed Call Forward
To cancel this Forward, dial “*93” and get the dial tone, then hang up.






Grandstream Networks, Inc.
BT200 User Manual
Page 18 of 32

Firmware 1.1.6.16
Last Updated: 06/2008

Configuration Guide
The BT200 can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone; secondly, through embedded web-configuration menu.

CONFIGURATION VIA KEYPAD
The BT200 keypad is the same as a traditional phone, with additional feature functionality including speaker, menu keys, LCD navigation keys, and advanced feature keys which include hold, transfer, conference and flash.
1. Be sure the phone is idle.
2. Press the MENU button to enter the keypad MENU to configure the phone.

Using the Keypad
1. To enter the MENU, press MENU button.
2. Navigate the menu by using the UP/DOWN
3. Press the MENU button to confirm a menu selection.
4. To delete an entry by pressing the MUTE/DEL button.

Press the MENU button to enter the key the Key Pad Menu. The menu options available are listed in table 8.

Table 8: Key Pad Configuration Menu
Manual Option Call Features
1
Display “[1] dhcP On ” or “[1] dhcP oFF” for the current selection Press MENU key to enter edit mode
2
Display “[2] IP Addr ”
Press MENU to display the current IP address
Enter new IP address if DHCP is OFF
3
Display “[3] SubNet ”
Press MENU to display the Subnet mask
Enter new Subnet mask if DHCP is OFF
4
Display “[4] routEr ”
Press MENU to display the Router/Gateway address
Enter new Router/Gateway address if DHCP is OFF
5
Display “[5] dnS ”
Press MENU to display the DNS address
Enter new DNS address if DHCP is OFF
6
Display “[6] tFtP ”
Press MENU to display the TFTP address
Enter new TFTP server IP address
7
Display “[7] G-711u 2”
Press MENU to select new codec
Press ‘↓’ or ’↑’ to browse a list of available codecs
8
Display “[8] codE rEL”
Press Menu to display the code releases
Press ‘↓’ or ’↑’ to browse
9
Display “[9] Phy Addr”
Press MENU to display the physical / MAC address.
10
Display “[10] ring 0”
Grandstream Networks, Inc.
BT200 User Manual
Page 19 of 32

Firmware 1.1.6.16
Last Updated: 06/2008

Press MENU to hear the selected ring tone, press ‘↓’ or ’↑’ to select the stored ring tones.
11
Display “[11]trANSPOrt”
Press MENU to select SIP Transport.
Factory Reset
Display “ -- rESEt --”. Please be very careful when using this function.
Two options: factory reset or manual reboot.
Factory Reset:

1. Key in the physical / MAC address on back of the phone.

2. Press MENU to reset phone to FACTORY DEFAULT settings. All your setting will be
erased.

Manual Reboot: Press MENU without keying anything.
Others
When phone is powered on and time is displayed
Press ‘↓’ or ’↑’, Display “ ring [4] ”, press ‘↓’ or ’↑’ again to hear and adjust the ring tone volume, from 0 (off) to 7 (maximum), off and on hook to set
Press SPEAKERPHONE button, or off hook and pick up handset, press ‘↓’ or ’↑’ to adjust
the speakerphone/headset or handset volume

CONFIGURATION VIA WEB BROWSER
The BT200 embedded Web server responds to HTTP/HTTPS GET/POST requests. Embedded HTML
pages allow a user to configure the IP phone through a Web browser such as Microsoft’s IE or Mozilla Firefox.

Access the Web Configuration Menu

To access the phone’s Web Configuration Menu